The Portuguese Manufacturer of Galvanized Steel Products Adds Additional Nitrogen Unit to Their Operation

The Nitrogen is used in the laser-cutting process.

After the successful implementation of the first unit in 2017, additional unit was delivered and commissioned just recently. We are confident it will contribute to competitive advantage of our customer.

the-portuguese-manufacturer-of-galvanized-steel-adds-additional-nitrogen-unit-to-their-operation-ir-image-v1-38.jpg

Nitrogen storage in cylinder bundles helps to cope with peak consumptions during laser cutting of thick materials.

the-portuguese-manufacturer-of-galvanized-steel-adds-additional-nitrogen-unit-to-their-operation-ir-image-v1-40.jpg

Part of the scope of supply is a high pressure compressor. Nitrogen produced by Oxywise PSA generator is boosted to 300bar.

the-portuguese-manufacturer-of-galvanized-steel-adds-additional-nitrogen-unit-to-their-operation-ir-image-v1-42.jpg

Relevant products

nitrogen-generator-ir-image-v1-85.png

Nitrogen Generator - Standard

Nitrogen generators are available in 6 standard models with capacity in the range from 1 - 115 m3/hour from 95% to 99.9995% purity.

nitrogen-generator-ir-image-v1-118.png

Nitrogen Generator - SEP

Nitrogen generators are available in 9 standard models with capacity in the range from 14.5 - 1150 m3/hour from 95% to 99.9995% purity.

nitrogen-generator-ir-image-v1-151-new.png

Nitrogen Generator - MULTISEP

Nitrogen generators are available in 16 standard models with capacity in the range from 115 to 5193 m3/hour from 95% to 99.9995% purity.

lasergas-generator-ir-image-v1-20.png

LaserGas Generator

This system meets and exceeds cutting gas quality requirements of the major manufacturers of laser cutting machines. 13 - 90 m3/h